509,ARMY BASE WORKSHOP AGRA
INDUSTRIAL PRESENTATION ON 509.pptx (Size: 2.63 MB / Downloads: 254)
Introduction To 509,Army Base Wksp.
Electronics base repair and Overhaul agency of Indian Army.
Established on 1st May, 1993.
ISO 9001:2000 certified.
Functional groups :
Departments of 509 ABW
GE GP General Engineering Group
RADAR GP Radar Equipment
TL GP Telecommunication Group
IN GP Instruments Group
M&R GP Manufacturing & Reclamation
ARCC Army Repair & Calibration Cell
FCRC Repair of Computers
CES Complete Expandable Stores
MCO Material Control Organization
Detect mines and unexploded ammunitions.
Operating temperature : -30 degree to +55 degree .
Operating principle : Building up a magnetic field via electric pulse to produce secondary field which is picked by a receiver coil.
Harmonic Radar: Super Broom
Detects electronic components such as diodes, transistors, ICs etc.
Does not react to components that do not contain semiconductor materials.
Signal generated is pure radio
signal with a freq. of
888.5 MHz for 1st harmonic
1777 MHz for 2nd harmonic
2666.5 MHz for 3rd harmonic
TIDEX(Exchange Telephone Automatic)
Up-controlled TDM exchange
CAPACITY: (40+12) (80+24) (160+48)
Line termination box
unconnected line indication
Automatic Electronic Switch(AES)
Integrated modular switch
Provides voice & data communication service
Uses two signals-
Uses real time operating system(irk)
AES is of two types:
1). AES mark 1:-capacity 32cd,
192 voice channels,256 teleprinters.
2). AES mark 2:-capacity 60cd,
360 voice channels, 480 teleprinters
operating frequency band : 30 to 87.975 MHz
channel spacing. 25 KHz
No. Of channels: 2320
Modulation scheme: FM
Power Amplifier (A2)
Display Unit (A8)
This laser based perimeter protection system having -9 to +9 volt DC supply system.
Transmitter card consists-IC LM/NE 567,LF 356.
Receiver is tuned to the transmitter's frequency.
IC 567 is a CCO which generate a pulsed waveform of frequency 1 k Hz.
Value of frequency is set by (1.1/R1C1).
IC 356 & transistor (2N2222) is a output driver circuit.
It drive the laser diode with a pulse amplitude 3V.
When an intruder tries to cross the unauthorized Area or boundary, then the LASER link between the transmitter and receiver is broken.
When laser beam is interrupted, diode act as open circuit.
Thus o/p of NIV amplifier become Low.
The pin-8 of ic goes LOW and the alarm connected via Buzzer is switched ON.
So the protection system is fool-proof and highly reliable.