Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)
Ask More Info Of  A Seminar Ask More Info Of A Project Post Reply  Follow us on Twitter
19-03-2011, 10:39 AM
Post: #1
AUTOMATIC ELECTRO-HYDRAULIC JACK FOR FOUR WHEELER

.doc  thar14.doc (Size: 115.5 KB / Downloads: 438)
AUTOMATIC ELECTRO-HYDRAULIC JACK FOR FOUR WHEELER
SYNOPSIS

This project work titled “AUTOMATIC ELECTRO-HYDRAULIC JACK FOR LIGHT VEHICLE” has been conceived having studied the difficulty in lifting the any type of light vehicles.
Our survey in the regard in several automobile garages, revealed the facts that mostly some difficult methods were adopted in lifting the vehicles for reconditioning.
Now the project has mainly concentrated on this difficulty, and hence a suitable electronic control unit has been designed. Such that the vehicles can be lifted from the floor land without application of any impact force. By pressing the button in the dashboard, the electronic control unit activates the hydraulic jack automatically.
The fabrication part of it has been considered with almost case for its simplicity and economy, such that this can be accommodated as one of the essential tools on automobile garages.
INTRODUCTION
This device the automatic electro-hydraulic jack for light vehicle garages has been developed to later the needs of small and medium automobile garages.
In most of the garages the vehicles are lifted by using screw jack. This needs high man power and skilled labors.
In order to avoid all such disadvantages, this automatic electro-hydraulic Jack has been designed in such a way that it can be used to lift the vehicle very smoothly without any impact force. The operation is made be simple that even any person can handled, by just pressing the button
WORKING OPERATION
The dash pad switch was activated at the time of any breakdown condition. The control signal is given to the solenoid valve, when the button is activated. The same time, the motor is started which is coupled with rotary hydraulic pump. The oil is suctioned from the oil tank and compressed oil goes to the solenoid valve.
The solenoid valve is activated at the time of dash pad button “ON”. The compressed fluid (oil) goes to the hydraulic cylinder. The compressed oil pusses the hydraulic cylinder piston and move forward. The RAM is fixed at the end of the single acting hydraulic cylinder. The piston moves towards the ground and the ram is lifting the vehicle upwards.
The solenoid valve is deactivated at the time of dash pad button “OFF”. The hydraulic cylinder fluid (oil) goes to the solenoid valve. Then the oil returns back to the oil tank, by the time of deactivating the solenoid valve. Thus the extra oil not required to maintain the oil level in the oil tank.
ADVANTAGES
It requires simple maintenance cares
The moving parts of this system are cooled by the oil itself used. Thus this project does not require any cooling arrangements.
The loaded light vehicles can be easily.
Checking and cleaning are easy, because of the main parts are screwed.
Handling is easy.
Manual power not required
Repairing is easy.
Replacement of parts is easy.
Maximum height up to 1.5 feet can be reached.
No Oil wastage.
DISADVANTAGES
1. Initial cost is high.
2. High maintenance cost.
APPLICATIONS
It is very much useful for Car Owners & Auto-garages. This automatic electro-hydraulic jack is used for lifting the vehicles.
Thus it can be useful for the following types of vehicles;
1) MARUTI,
2) AMBASSADOR,
3) FIAT,
4) MAHINDRA,
5) TATA
18-09-2011, 10:11 AM
Post: #2
RE: AUTOMATIC ELECTRO-HYDRAULIC JACK FOR FOUR WHEELER
what will be the work procedure for this topic.

Please Use Search http://seminarprojects.com/search.php wisely To Get More Information About A Seminar Or Project Topic
20-09-2011, 10:18 AM
Post: #3
RE: AUTOMATIC ELECTRO-HYDRAULIC JACK FOR FOUR WHEELER
To get more information about the topic "AUTOMATIC ELECTRO-HYDRAULIC JACK FOR FOUR WHEELER " please refer the link below


http://www.seminarprojects.com/Thread-au...6#pid56646
26-09-2011, 10:34 PM
Post: #4
RE: AUTOMATIC ELECTRO-HYDRAULIC JACK FOR FOUR WHEELER
plz tell me the procedure for fabrication of automatic electro hydraulic screwjack for four wheeler
27-09-2011, 09:39 AM
Post: #5
RE: AUTOMATIC ELECTRO-HYDRAULIC JACK FOR FOUR WHEELER
To get more information about the topic "AUTOMATIC ELECTRO-HYDRAULIC JACK FOR FOUR WHEELER " please refer the link below


http://www.seminarprojects.com/Thread-au...6#pid56646
Rating AUTOMATIC ELECTRO-HYDRAULIC JACK FOR FOUR WHEELER Options
Share AUTOMATIC ELECTRO-HYDRAULIC JACK FOR FOUR WHEELER To Your Friends :- Seminar Topics Bookmark
Post Reply 

Marked Categories : hydrolic, hydraulic project ideas, mini hydraulic jack project, automatic lifting jack is used in vehicle, procedure for automatic pneumatic jack, procedure for pneumatic jack, project on automatic electrohydraulic jack, electrical hydraulic projects for engineering, automatic hydraulic jack for four wheelers, full information about hydraulic jack, project report about automatic electro hydraulic jack, automatic hydraulic lift for four wheelers doc, procedure to fabricate automatic electro hydraulic jack, automatic hydraulic lift for four wheelers, automatic electro hydraulic jack, project of autometic jack, design of automatic jack, hydraulic jack project,

[-]
Quick Reply
Message
Type your reply to this message here.


Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MAGNETIC AUTOMATIC GUIDE VEHICLE seminar code 0 28 30-10-2014 04:09 PM
Last Post: seminar code
  A Comparative Study on Hydraulic Circuit Alternatives for Handling Problem of Contami seminar code 0 30 30-10-2014 12:49 PM
Last Post: seminar code
  DESIGN AND FABRICATION OF HYDRAULIC JACK FOR LIFT seminar code 0 20 28-10-2014 03:29 PM
Last Post: seminar code
  Design and Development of Remotecontrol, Hydraulic Jack seminar code 0 26 28-10-2014 11:49 AM
Last Post: seminar code
  AUTOMATIC PNEUMATIC TAPPING MACHINE seminar code 0 21 27-10-2014 12:58 PM
Last Post: seminar code
  AUTOMATIC BUSH ATACHMENT ON BEARING seminar code 0 18 27-10-2014 12:46 PM
Last Post: seminar code
  ANALYSIS AND REDESIGN OF AN AUTOMATIC CAN CRUSHER seminar code 0 33 27-10-2014 11:36 AM
Last Post: seminar code
  “COOLING SYSTEM AND WEIGHT REDUCTION IN HYDRAULIC GEAR PUMP” seminar code 0 29 27-10-2014 10:59 AM
Last Post: seminar code
  DESIGN AND DEVELOP AN AUTOMATIC SORTING MACHINE BASED ON WEIGHT FOR FOOD INDUSTRY In seminar code 0 47 25-10-2014 03:29 PM
Last Post: seminar code
  To Design And Manufacture Hydraulic Bending, Cutting And Punching Machine seminar code 0 28 25-10-2014 03:07 PM
Last Post: seminar code
This Page May Contain What is AUTOMATIC ELECTRO-HYDRAULIC JACK FOR FOUR WHEELER And Latest Information/News About AUTOMATIC ELECTRO-HYDRAULIC JACK FOR FOUR WHEELER,If Not ...Use Search to get more info about AUTOMATIC ELECTRO-HYDRAULIC JACK FOR FOUR WHEELER Or Ask Here

Options: