Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)
Ask More Info Of  A Seminar Ask More Info Of A Project Post Reply  Follow us on Twitter
21-01-2012, 03:59 PM
Post: #1
Basic Principles of Ultrasonic Testing
Basic Principles of Ultrasonic Testing


.ppt  welding_2.ppt (Size: 628.5 KB / Downloads: 326)

basic principles of ultrasonic testing Wave propagation

Longitudinal waves propagate in all kind of materials.
Transverse waves only propagate in solid bodies.
Due to the different type of oscillation, transverse waves travel at lower speeds.
Sound velocity mainly depends on the density and E-modulus of the material.

Reflection and Transmission


As soon as a sound wave comes to a change in material characteristics ,e.g. the surface of a workpiece, or an internal inclusion, wave propagation will change too:


Reception of ultrasonic waves


A sound wave hitting a piezoelectric crystal, induces crystal vibration which then causes electrical voltages at the crystal surfaces.
17-09-2012, 03:36 PM
Post: #2
RE: Basic Principles of Ultrasonic Testing
Ultrasonics Testing


.docx  ultra sonic.docx (Size: 136.01 KB / Downloads: 64)


Introduction

Ultrasonics is the name given to the study and application of ultrasound, which is sound of a pitch too high to be detected by the human ear, i.e. of frequencies greater than about 18 kHz. Ultrasonic waves have a wide variety of applications over an extended range of intensity, including cutting, cleaning and the destruction of tissue at the upper extremity and non-destructive testing (NDT) at the lower end. A non-destructive test is one in which there is no impairment of the properties and performance in future use of the object under examination. With ultrasonic non-destructive testing, which is effectively a mechanical method, periodic mechanical stresses are applied to the object. It is essential that there have been no changes in dimensions and structure of the object when the test is completed. This can only be achieved when the maximum applied stresses do not exceed the elastic limit below which Hookels law is obeyed, so that the resultant strain is proportional to the applied stress. Hence it is necessary that the ultra- sonic intensity is sufficiently low for the elastic limit not to be exceeded. Ultrasonic testing consists effectively of the propagation of low amplitude waves through a material to measure either or both the time of travel and any change of intensity for a given distance. Applications include distance gauging, flaw detection and measuring parameters (such as elastic moduli and grain size) which are related to the material structure. Reasons for using ultrasonic as opposed to audible fre quencies include the following.

The main advantages of ultrasonic testing are:

• testing can be carried out from a single surface;
• a high degree of penetration is possible in many commonly-used materials, which is in contrast with the lower degree of penetration encountered with radiological testing of metals;
• accuracy in locating and measuring defects;
• the ability to detect and size very small defects; and
• compatibility with automatic scanning devices and with micro- processors and computers.

The principal drawbacks are these:

• Operators must be properly trained, highly experienced and possess a high degree of reliability and integrity. However, with 100 % automated testing, these requirements may be somewhat relaxed provided that the functions of the automated system are thoroughly understood.
• With manual operation over a large surface area only a small part of a surface can be scanned at a time, although this can be improved upon, where feasible, with the use of transducer arrays.
• A high degree of coupling between the transducer and the surface to be scanned is required, though much progress is now being made with the development of non-contact transducers.

Piezoelectric Transducers

The conversion of electrical pulses to mechanical vibrations and the conversion of returned mechanical vibrations back into electrical energy is the basis for ultrasonic testing. The active element is the heart of the transducer as it converts the electrical energy to acoustic energy, and vice versa. The active element is basically a piece of polarized material (i.e. some parts of the molecule are positively charged, while other parts of the molecule are negatively charged) with electrodes attached to two of its opposite faces. When an electric field is applied across the material, the polarized molecules will align themselves with the electric field, resulting in induced dipoles within the molecular or crystal structure of the material. This alignment of molecules will cause the material to change dimensions. This phenomenon is known as electrostriction. In addition, a permanently-polarized material such as quartz (SiO2) or barium titanate (BaTiO3) will produce an electric field when the material changes dimensions as a result of an imposed mechanical force. This phenomenon is known as the piezoelectric effect. Additional information on why certain materials produce this effect can be found in the linked presentation material, which was produced by the Valpey Fisher Corporation.
11-08-2013, 04:51 PM
Post: #3
RE: Basic Principles of Ultrasonic Testing
nyc job ..................................................................tm http://seminarprojects.com/...................keep it guyz
12-08-2013, 09:16 AM
Post: #4
RE: Basic Principles of Ultrasonic Testing
To get full information or details of Basic Principles of Ultrasonic Testing please have a look on the pages

http://seminarprojects.com/Thread-basic-...ic-testing

http://seminarprojects.com/Thread-ppt-on...#pid140090

if you again feel trouble on Basic Principles of Ultrasonic Testing please reply in that page and ask specific fields in Basic Principles of Ultrasonic Testing
Rating Basic Principles of Ultrasonic Testing Options
Share Basic Principles of Ultrasonic Testing To Your Friends :- Seminar Topics Bookmark
Post Reply 

Marked Categories : basic princple ultasonic testing, basic ultrasonic principles, ultrasonic inspection ppt, ultra sonic testing method file type doc, basic principles involved ultrasonic testing, ultrasonic testing ppt pdf, basic principles of ultrasonic testing, basic ultrasonic testing, ultrasonic testing basic principles, project report ultrasonic testing, ultrasonic testing, ultrasonic testing basic, principles of ultrasonic testing, ppt on application of piezoelectric crystal in ultrasonic inspection, basic principle ultrasonic testing, basic principles of ultrasonic testing ppt, basic principles of ultrasonc testing, basic principle of ultrasonic testing, ultrasonic,

[-]
Quick Reply
Message
Type your reply to this message here.


Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  ULTRASONIC MOTORS mkaasees 0 36 23-10-2014 04:28 PM
Last Post: mkaasees
  AC Motor Testing and Predictive Maintenance Seminar Report seminar code 0 81 21-08-2014 11:12 AM
Last Post: seminar code
  Implementation Of Zoom FFT in Ultrasonic Blood Flow Analysis computer science crazy 12 8,755 10-06-2014 10:26 AM
Last Post: mkaasees
  Motor Protection Principles seminar post 0 138 21-05-2014 11:56 AM
Last Post: seminar post
  Basic Monochrome Television System pdf seminar projects maker 0 114 24-04-2014 01:07 PM
Last Post: seminar projects maker
  FUNDAMENTAL RELAY-OPERATING PRINCIPLES AND CHARACTERISTICS pdf seminar projects maker 0 262 27-09-2013 02:32 PM
Last Post: seminar projects maker
  To verify the characteristics of Basic Digital Gates seminar projects maker 0 267 26-09-2013 03:46 PM
Last Post: seminar projects maker
  Basic Principles and Functions of Electrical Machines pdf seminar projects maker 0 410 14-09-2013 03:03 PM
Last Post: seminar projects maker
  Switching Principles pdf seminar projects maker 0 252 13-09-2013 02:23 PM
Last Post: seminar projects maker
  Transmission Line Protection Principles pdf seminar projects maker 0 483 11-09-2013 02:39 PM
Last Post: seminar projects maker
This Page May Contain What is Basic Principles of Ultrasonic Testing And Latest Information/News About Basic Principles of Ultrasonic Testing ,If Not ...Use Search to get more info about Basic Principles of Ultrasonic Testing Or Ask Here

Options: