GSM, FPRS, KEYPAD BASED ATM SECURITY SYSTEM
137.GSM,_FPRS_,KEYPAD_based_ATM_Security_(DOC).doc (Size: 1.62 MB / Downloads: 144)
GSM, FPRS, KEYPAD BASED ATM SECURITY SYSTEM
The main objective of this project is to develop an embedded system, which is used for security applications. In this security system the specific persons can only enter; by using this embedded system we can give access to the authorized people through the finger print modules and keypads.
The system is programmable we can change the data of the authorized people in the data base of the embedded system; we can access the data on the embedded system on to computer. The complete code for the embedded system is going to be developed using C-Language.
The embedded system is going to be developed based on microcontroller; when ever the person puts his finger on the reader the system will detect the authorized persons then it asks for pin and gets the message to authorized persons mobile through the GSM technology. Fingerprint reader module will be interfaced to the microcontroller and the pin is entered through the either mobile or keypad.
SOFTWARE: Embedded ‘C’ language.
TOOLS: Keil uVision, uC flash programmer.
TARGET DEVICE: 8051 Microcontroller
APPLICATIONS: security systems.
ADVANTAGES: Low cost, automated operation, Low Power consumption.
REFERENCE: The 8051 micro controller and embedded systems by Mazidi.
INTRODUCTION TO EMBEDDED SYSTEMS
An embedded system is a special-purpose computer system designed to perform one or a few dedicated functions, sometimes with real-time computing constraints. It is usually embedded as part of a complete device including hardware and mechanical parts. In contrast, a general-purpose computer, such as a personal computer, can do many different tasks depending on programming. Embedded systems have become very important today as they control many of the common devices we use.
Since the embedded system is dedicated to specific tasks, design engineers can optimize it, reducing the size and cost of the product, or increasing the reliability and performance. Some embedded systems are mass-produced, benefiting from economies of scale.
Physically, embedded systems range from portable devices such as digital watches and MP3 players, to large stationary installations like traffic lights, factory controllers, or the systems controlling nuclear power plants. Complexity varies from low, with a single microcontroller chip, to very high with multiple units, peripherals and networks mounted inside a large chassis or enclosure.
In general, "embedded system" is not an exactly defined term, as many systems have some element of programmability. For example, Handheld computers share some elements with embedded systems — such as the operating systems and microprocessors which power them — but are not truly embedded systems, because they allow different applications to be loaded and peripherals to be connected.
An embedded system is some combination of computer hardware and software, either fixed in capability or programmable, that is specifically designed for a particular kind of application device. Industrial machines, automobiles, medical equipment, cameras, household appliances, airplanes, vending machines, and toys (as well as the more obvious cellular phone and PDA) are among the myriad possible hosts of an embedded system. Embedded systems that are programmable are provided with a programming interface, and embedded systems programming is a specialized occupation.
Certain operating systems or language platforms are tailored for the embedded market, such as Embedded Java and Windows XP Embedded. However, some low-end consumer products use very inexpensive microprocessors and limited storage, with the application and operating system both part of a single program. The program is written permanently into the system's memory in this case, rather than being loaded into RAM (random access memory), as programs on a personal computer are.
APPLICATIONS OF EMBEDDED SYSTEM
We are living in the Embedded World. You are surrounded with many embedded products and your daily life largely depends on the proper functioning of these gadgets. Television, Radio, CD player of your living room, Washing Machine or Microwave Oven in your kitchen, Card readers, Access Controllers, Palm devices of your work space enable you to do many of your tasks very effectively. Apart from all these, many controllers embedded in your car take care of car operations between the bumpers and most of the times you tend to ignore all these controllers.
In recent days, you are showered with variety of information about these embedded controllers in many places. All kinds of magazines and journals regularly dish out details about latest technologies, new devices; fast applications which make you believe that your basic survival is controlled by these embedded products. Now you can agree to the fact that these embedded products have successfully invaded into our world. You must be wondering about these embedded controllers or systems. What is this Embedded System?
The computer you use to compose your mails, or create a document or analyze the database is known as the standard desktop computer. These desktop computers are manufactured to serve many purposes and applications.
You need to install the relevant software to get the required processing facility. So, these desktop computers can do many things. In contrast, embedded controllers carryout a specific work for which they are designed. Most of the time, engineers design these embedded controllers with a specific goal in mind. So these controllers cannot be used in any other place.
Theoretically, an embedded controller is a combination of a piece of microprocessor based hardware and the suitable software to undertake a specific task.
These days designers have many choices in microprocessors/microcontrollers. Especially, in 8 bit and 32 bit, the available variety really may overwhelm even an experienced designer. Selecting a right microprocessor may turn out as a most difficult first step and it is getting complicated as new devices continue to pop-up very often.
In the 8 bit segment, the most popular and used architecture is Intel's 8031. Market acceptance of this particular family has driven many semiconductor manufacturers to develop something new based on this particular architecture. Even after 25 years of existence, semiconductor manufacturers still come out with some kind of device using this 8031 core.
Military and aerospace software applications
From in-orbit embedded systems to jumbo jets to vital battlefield networks, designers of mission-critical aerospace and defense systems requiring real-time performance, scalability, and high-availability facilities consistently turn to the LynxOS® RTOS and the LynxOS-178 RTOS for software certification to DO-178B.
Rich in system resources and networking services, LynxOS provides an off-the-shelf software platform with hard real-time response backed by powerful distributed computing (CORBA), high reliability, software certification, and long-term support options.
The LynxOS-178 RTOS for software certification, based on the RTCA DO-178B standard, assists developers in gaining certification for their mission- and safety-critical systems. Real-time systems programmers get a boost with LynuxWorks' DO-178B RTOS training courses.
LynxOS-178 is the first DO-178B and EUROCAE/ED-12B certifiable, POSIX®-compatible RTOS solution.
"Five-nines" availability, CompactPCI hot swap support, and hard real-time response—LynxOS delivers on these key requirements and more for today's carrier-class systems. Scalable kernel configurations, distributed computing capabilities, integrated communications stacks, and fault-management facilities make LynxOS the ideal choice for companies looking for a single operating system for all embedded telecommunications applications—from complex central controllers to simple line/trunk cards.
LynuxWorks Jumpstart for Communications package enables OEMs to rapidly develop mission-critical communications equipment, with pre-integrated, state-of-the-art, data networking and porting software components—including source code for easy customization.
The Lynx Certifiable Stack (LCS) is a secure TCP/IP protocol stack designed especially for applications where standards certification is required.
Electronics applications and consumer devices
As the number of powerful embedded processors in consumer devices continues to rise, the BlueCat® Linux® operating system provides a highly reliable and royalty-free option for systems designers.
And as the wireless appliance revolution rolls on, web-enabled navigation systems, radios, personal communication devices, phones and PDAs all benefit from the cost-effective dependability, proven stability and full product life-cycle support opportunities associated with BlueCat embedded Linux. BlueCat has teamed up with industry leaders to make it easier to build Linux mobile phones with Java integration.
For makers of low-cost consumer electronic devices who wish to integrate the LynxOS real-time operating system into their products, we offer special MSRP-based pricing to reduce royalty fees to a negligible portion of the device's MSRP.
Industrial automation and process control software
Designers of industrial and process control systems know from experience that LynuxWorks operating systems provide the security and reliability that their industrial applications require.
From ISO 9001 certification to fault-tolerance, POSIX conformance, secure partitioning and high availability, we've got it all. Take advantage of our 20 years of experience.
MICROCONTROLLER VERSUS MICROPROCESSOR
What is the difference between a Microprocessor and Microcontroller? By microprocessor is meant the general purpose Microprocessors such as Intel's X86 family (8086, 80286, 80386, 80486, and the Pentium) or Motorola's 680X0 family (68000, 68010, 68020, 68030, 68040, etc). These microprocessors contain no RAM, no ROM, and no I/O ports on the chip itself. For this reason, they are commonly referred to as general-purpose Microprocessors.
A system designer using a general-purpose microprocessor such as the Pentium or the 68040 must add RAM, ROM, I/O ports, and timers externally to make them functional. Although the addition of external RAM, ROM, and I/O ports makes these systems bulkier and much more expensive, they have the advantage of versatility such that the designer can decide on the amount of RAM, ROM and I/O ports needed to fit the task at hand. This is not the case with Microcontrollers.