Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)
Ask More Info Of  A Seminar Ask More Info Of A Project Post Reply  Follow us on Twitter
02-03-2012, 02:18 PM
Post: #1

.ppt  ENGINE.ppt (Size: 3.37 MB / Downloads: 425)

To understand the operational principles and basic mechanisms of the internal combustion engine

Purpose of an IC engine
to convert fuel (petrol, diesel, NGV) into motion to move your car by burning the fuel inside an engine (internal combustion engine)
There are different kinds of IC engines
Spark ignition (SI) or petrol engine
Compression ignition (CI) or diesel engines
Rotary engines
Two-stroke engines (motorbikes)
Each has its own advantages and disadvantages
29-09-2012, 05:48 PM
Post: #2
Internal Combustion Engine.

.docx  I.C engine.docx (Size: 16.84 KB / Downloads: 151)

Construction of I.C engine:

The figure shows the mechanical elements of the reciprocating I.C engines. The piston which reciprocates in the cylinder is made a very close fit in the cylinder. The cylinder is bored in the cylinder block which may be cast integral with the crankcase or the cylinder block may be bolted on the top of the crankcase. The combustion space is provided in the top cylinder head. In the passages of cooling medium are shown cast in walls of the cylinder block round the cylinder and also cast in the cylinder head the combustion space.
The reciprocating motion of the piston is converted into the rotary motion of the crankshaft by means of connecting rod and crank. The pin, which connects the piston and connecting rod, is known as the gudgeon pin or wrist pin. The crankshaft rotates in the main bearings that are set in the crankshaft. The flywheel is fitted on the crankshaft in order to smoothen out the uneven torque.
A mechanical cycle for an I.C engine can be completed in one revolution of the crankshaft or in two revolutions. The opening and closing of the valve is controlled by means of cams which are fixed to the crankshaft. The control of admission and exhausted by means of ports in two-stroke cycle.

Four stroke cycle engine principle:

In I.C engine the following events take place in the cyclic order:

1. The quantity of air mixture of air and fuel must be taken in the engine.
2. If the charge contains only air, the fuel must be injected at the end of compression.
3. The charge in the engine cylinder must be compressed to the desired pressure.
4. The charge must be ignited at proper time.
5. The combustion of the fuel should be complicated.
6. The energy developed in the engine must be transferred to the crankshaft.
7. Brunt gases should be removed.

Two stroke cycle engine principle:

The figure illustrates diagrammatically the two stroke cycle petrol engine. Employing crank case compression of the type used in say an ordinary motor cycle.
In two stroke cycle engine we have parts instead of valve through the inlet parts the mixtures in taken in to the crank case of the engine the exhaust ports serve the purpose of exhausting the gases from the engine cylinder a mixture of air and fuel slightly compressed in the crank case enters through the transfer ports and drives the burnt gases out of the cylinder through the exhaust ports for the remainders of the upward stroke the charge after the piston has covered the transfer and exhaust ports.
When the piston reaches the end of its strokes the entire charge is compressed in the clearance space and the ignited charge exerts pressure on piston the down ward movement of the piston causes the compression of the charge taken in to crank case of cylinder when the piston moves further the transfer ports are open an so are exhaust ports and the stroke is completed when the piston reaches the end of the down ward stroke.
It should be clearly seen that in two stroke engine both the side of the piston are effective.

Comparison between Two-stroke cycle engine & Four-stroke cycle engine:

1. In two stroke cycle engine every revolution has active strokes hence in four stroke cycle one power stroke in four strokes.
2. In two stroke cycle engine gives one working stroke per revolution and thus for the same speed and a given size increases of power is obtained over the four stroke cycle engine.
3. Four stroke cycle engines generally gives higher efficiency due to the positive scavenging action during the exhaust.
4. The quantity of burnt gauges left in the two stroke cycle engine is greater than that in the four stroke.
5. One reason for lower efficiency of two stroke.
27-10-2012, 11:25 AM
Post: #3
to get information about the topic "I.C. Engine Cycles or Thermodynamic Analysis" full report ppt and related topic refer the link bellow
Share INTERNAL COMBUSTION (IC) ENGINE To Your Friends :- Seminar Topics Bookmark
Post Reply 

Marked Categories : i c engine, ic engines seminor topic, intrnal combustion engines, topic on seminar in ic engine, ic engine, seminar topics for i c engine, seminars on i c engine, basics of ic engine ppt, basics of ic engines ppt, seminar topics for ic engine, the basics of internal combustion engines seminars, ic engine project topics, i c engine topics, project and seminar on i c engine, project topic on internal combustion engine, topics of ic engine for seminar, internal combustion engine seminar topics, project report for internal combustion in ic engine, pdf file for internal combustion in ic engine, ic engine topic seminar, seminar on ic engine, internal combustion engine,

Quick Reply
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  REPORT ON MULTI AIR ENGINE study tips 2 1,494 15-04-2016 12:22 PM
Last Post: mkaasees
  DIGITAL TWIN SPARK IGNITION (DTSI) A New Revolution of Twin Spark in I.C. Engine seminar surveyer 5 22,664 06-04-2016 03:26 PM
Last Post: mkaasees
  Review on Exhaust Gas Heat Recovery for I.C. Engine dhanabhagya 0 0 04-02-2016 04:08 PM
Last Post: dhanabhagya
  JET Engine dhanabhagya 0 131 15-01-2016 04:09 PM
Last Post: dhanabhagya
  BALL PISTON ENGINE dhanabhagya 2 175 09-01-2016 03:52 PM
Last Post: mkaasees
  Green Engine seminar report mechanical engineering 46 87,702 01-10-2015 10:30 AM
Last Post: mkaasees
  Engine working principle of dual-fuel (DF) engines seminar tips 6 5,370 17-06-2015 10:10 AM
Last Post: mkaasees
  Green Engine presentation Abstract 0 567 03-06-2015 12:52 PM
Last Post: presentation Abstract
  Two Stroke Engine Using Reed Valves presentation Abstract 0 357 02-06-2015 04:20 PM
Last Post: presentation Abstract
  Turbofan Engine presentation Abstract 0 307 02-06-2015 04:10 PM
Last Post: presentation Abstract
This Page May Contain What is INTERNAL COMBUSTION (IC) ENGINE And Latest Information/News About INTERNAL COMBUSTION (IC) ENGINE ,If Not ...Use Search to get more info about INTERNAL COMBUSTION (IC) ENGINE Or Ask Here