Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)
Ask More Info Of  A Seminar Ask More Info Of A Project Post Reply  Follow us on Twitter
19-04-2013, 03:00 PM
Post: #1
REPORT ON SMART AND INTELLIGENT GSM BASED AUTOMATIC METER READING SYSTEM
SMART AND INTELLIGENT GSM BASED AUTOMATIC METER READING SYSTEM


.docx  SMART AND INTELLIGENT.docx (Size: 14.19 KB / Downloads: 21)

ABSTRACT

The automated electricity billing system is implemented for the purpose of getting a fully automated electricity billing system. The aim of this system is to measure and monitor the electricity consumed by consumers in a locality and transmitting the consumed power to the station as well as issuing the bill of consumed power automatically. It is also aims to find the malpractices in the meter. Using this system the Electricity Board can access all data regarding the consumed power in each home and in each station. From the data the Board can find out power theft also it is also offers a system to charge extra payment for the excess usage of power at peak time (6.00---10.00pm) Prepaid and Postpaid billing are also possible for our new system.GSM is using for automating the system. The consumed unit transmission and bill reception are achieved by the GSM module in the client side.

DESCRIPTION

AVR Microcontroller:


The major heart of this project is AVR microcontroller, it has more features like 16bit timer, 10-bit ADC, USART, SPI, I2C, 256 bytes of EEPROM memory, and 32kbytes of flash program memory, then at last its speed of program execution is about to 1 microsecond or 10 MIPS (10 Million Instructions per second), etc. However, compare to other microcontroller it is fast and very ease to program in C language because of huge support can gain from the manufacturer for programming. The special IDE offered by the manufacture, it is named as AVR Studio IDE for it code generation purpose

MAX 232

The AVR microcontrollers are connected to through RS232 protocol, for this inbuilt USART module is utilized. A serial port sends and receives data one bit at a time over one wire. While it takes eight times as long as to transfer each byte of data this way, only a few wires are required. In fact, two-way (full duplex) communications is possible with only three separate wires- one to send, one to receive, and a common signal ground wire.

GSM

GSM is a cellular network, which means that mobile phones connect to it by searching for cells in the immediate vicinity. GSM networks operate in four different frequency ranges. Most GSM networks operate in the 900 MHz or 1800 MHz bands. Some countries in the Americas (including Canada and the United States) use the 850 MHz and 1900 MHz bands because the 900 and 1800 MHz frequency bands were already allocated. The rarer 400 and 450 MHz frequency bands are assigned in some countries, notably Scandinavia, where these frequencies were previously used for first-generation systems
Rating REPORT ON SMART AND INTELLIGENT GSM BASED AUTOMATIC METER READING SYSTEM Options
Share REPORT ON SMART AND INTELLIGENT GSM BASED AUTOMATIC METER READING SYSTEM To Your Friends :- Seminar Topics Bookmark
Post Reply 

Marked Categories : gsm base electric meter reading, gsm based automatic meter reading seminar report, intelegent gsm based electronic power meter report, automatic meter reading system, smart intelligent railway station ppt, seminar report about smart intelligent gsm base automatic meter reading system, system flowchart of smart and intelligent gsm based meter, alternate topic for smart and intelligent gsm based automatic meter reading system, automatic meter reading, gsm based automatic meter reading and billing system via pc, gsm based automatic meter reading system using avr,

[-]
Quick Reply
Message
Type your reply to this message here.


Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  helping system for blind person seminar code 0 25 Yesterday 03:31 PM
Last Post: seminar code
  Automatic StarDetla Starter Using Relay and Adjustable time seminar code 0 15 Yesterday 03:25 PM
Last Post: seminar code
  Automatic Power Factor Correction seminar code 0 19 Yesterday 03:22 PM
Last Post: seminar code
  GSM Based Energy Meter Billing With Load Control seminar code 0 18 Yesterday 02:27 PM
Last Post: seminar code
  Voice Recognition Based Security System seminar code 0 34 Yesterday 12:42 PM
Last Post: seminar code
  ULTRASONIC DISTANCE MEASUREMENT SYSTEM & ALERT BY GSM seminar code 0 30 Yesterday 12:41 PM
Last Post: seminar code
  touchscreen based home automation system seminar code 0 32 Yesterday 12:40 PM
Last Post: seminar code
  Zigbee Based Electronic Trolley System seminar code 0 31 Yesterday 12:39 PM
Last Post: seminar code
  MUSEUM SECURITY SYSTEM seminar code 0 27 Yesterday 12:36 PM
Last Post: seminar code
  PREPAID ENERGY METER USING KEYPAD seminar code 0 17 Yesterday 12:34 PM
Last Post: seminar code
This Page May Contain What is REPORT ON SMART AND INTELLIGENT GSM BASED AUTOMATIC METER READING SYSTEM And Latest Information/News About REPORT ON SMART AND INTELLIGENT GSM BASED AUTOMATIC METER READING SYSTEM,If Not ...Use Search to get more info about REPORT ON SMART AND INTELLIGENT GSM BASED AUTOMATIC METER READING SYSTEM Or Ask Here

Options: